New Commands¶
This page contains details on New commands.
New-MyEdgeGateway¶
- NAME
- New-MyEdgeGateway
- SYNOPSIS
- Creates a new Edge Gateway with Default Parameters
- SYNTAX
- New-MyEdgeGateway [-Name] <String> [-OrgVdcName] <String> [-OrgName] <String> [-Size] <String> [-ExternalNetwork] <String> [-IPAddress] <IPAddress> [-SubnetMask] <IPAddress> [-Gateway] <IPAddress> [-IPRangeStart] <IPAddress> [-IPRangeEnd] <IPAddress> [[-Timeout] <Int32>] [<CommonParameters>]
- DESCRIPTION
Creates a new Edge Gateway with Default Parameters
Default Parameters are: * HA State * DNS Relay
- PARAMETERS
- -Name <String>
- Name of the New Edge Gateway as String
- -OrgVdcName <String>
- OrgVDC where the new Edge Gateway should be created as string
- -OrgName <String>
- Org where the new Edge Gateway should be created as string
- -Size <String>
- Size of the new Edge Gateway as string
- -ExternalNetwork <String>
- External Network of the new Edge Gateway as String
- -IPAddress <IPAddress>
- IP Address of the New Edge Gateway as IP Address
- -SubnetMask <IPAddress>
- Subnet Mask of the New Edge Gateway as IP Address
- -Gateway <IPAddress>
- Gateway of the New Edge Gateway as IP Address
- -IPRangeStart <IPAddress>
- Sub Allocation IP Range Start of the New Edge Gateway as IP Address
- -IPRangeEnd <IPAddress>
- Sub Allocation IP Range End of the New Edge Gateway as IP Address
- -Timeout <Int32>
Timeout for the Edge Gateway to get Ready
Default: 120s
- <CommonParameters>
- This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, OutBuffer, PipelineVariable, and OutVariable. For more information, see about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
————————– EXAMPLE 1 ————————–
PS C:>New-MyEdgeGateway -Name “TestEdge” -OrgVDCName “TestVDC” -OrgName “TestOrg” -Size compact -ExternalNetwork “ExternalNetwork” -IPAddress “192.168.100.1” -SubnetMask “255.255.255.0” -Gateway “192.168.100.254” -IPRangeStart “”192.168.100.2” -IPRangeEnd “”192.168.100.3” -Verbose
- REMARKS
- To see the examples, type: “get-help New-MyEdgeGateway -examples”. For more information, type: “get-help New-MyEdgeGateway -detailed”. For technical information, type: “get-help New-MyEdgeGateway -full”. For online help, type: “get-help New-MyEdgeGateway -online”
New-MyOrg¶
- NAME
- New-MyOrg
- SYNOPSIS
- Creates a new vCD Org with Default Parameters
- SYNTAX
- New-MyOrg [-Name] <String> [-FullName] <String> [[-Description] <String>] [-Enabled] [<CommonParameters>]
- DESCRIPTION
Creates a new vCD Org with Default Parameters.
Default Parameters are: * Catalog Publishing * Catalog Subscription * VM Quota * Stored VM Quota * VM Lease Time * Stored VM Lease Time * Password Policy Settings
- PARAMETERS
- -Name <String>
- Name of the New Org as String
- -FullName <String>
- Full Name of the New Org as String
- -Description <String>
- Description of the New Org as String
- -Enabled [<SwitchParameter>]
Should the New Org be enabled after creation
Default:$false
- <CommonParameters>
- This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, OutBuffer, PipelineVariable, and OutVariable. For more information, see about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
————————– EXAMPLE 1 ————————–
PS C:>New-MyOrg -Name “TestOrg” -FullName “Test Org” -Description “PowerCLI Test Org”
- REMARKS
- To see the examples, type: “get-help New-MyOrg -examples”. For more information, type: “get-help New-MyOrg -detailed”. For technical information, type: “get-help New-MyOrg -full”. For online help, type: “get-help New-MyOrg -online”
New-MyOrgAdmin¶
- NAME
- New-MyOrgAdmin
- SYNOPSIS
- Creates a new vCD Org Admin with Default Parameters
- SYNTAX
- New-MyOrgAdmin [-Name] <String> [-Pasword] <String> [-FullName] <String> [-EmailAddress] <String> [-Org] <String> [-Enabled] [<CommonParameters>]
- DESCRIPTION
Creates a new vCD Org Admin with Default Parameters
Default Parameters are: * User Role
- PARAMETERS
- -Name <String>
- Name of the New Org Admin as String
-Pasword <String>
- -FullName <String>
- Full Name of the New Org Admin as String
- -EmailAddress <String>
- EmailAddress of the New Org Admin as String
- -Org <String>
- Org where the new Org Admin should be created as string
- -Enabled [<SwitchParameter>]
Should the New Org be enabled after creation
Default:$false
- <CommonParameters>
- This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, OutBuffer, PipelineVariable, and OutVariable. For more information, see about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
————————– EXAMPLE 1 ————————–
PS C:>New-MyOrgAdmin -Name “OrgAdmin” -Pasword “Anfang!!” -FullName “Org Admin” -EmailAddress “OrgAdmin@TestOrg.local” -Org “TestOrg”
- REMARKS
- To see the examples, type: “get-help New-MyOrgAdmin -examples”. For more information, type: “get-help New-MyOrgAdmin -detailed”. For technical information, type: “get-help New-MyOrgAdmin -full”. For online help, type: “get-help New-MyOrgAdmin -online”
New-MyOrgNetwork¶
- NAME
- New-MyOrgNetwork
- SYNOPSIS
- Creates a new Org Network with Default Parameters
- SYNTAX
- New-MyOrgNetwork [-Name] <String> [-OrgVdcName] <String> [-OrgName] <String> [-EdgeName] <String> [-SubnetMask] <IPAddress> [-Gateway] <IPAddress> [-IPRangeStart] <IPAddress> [-IPRangeEnd] <IPAddress> [[-Shared] <Boolean>] [[-Timeout] <Int32>] [<CommonParameters>]
DESCRIPTION
- PARAMETERS
- -Name <String>
- Name of the New Org Network as String
- -OrgVdcName <String>
- OrgVDC where the new Org Network should be created as string
- -OrgName <String>
- Org where the newOrg Networkshould be created as string
- -EdgeName <String>
- Edge Gateway Name for the new Org Network as String
- -SubnetMask <IPAddress>
- Subnet Mask of the New Org Network as IP Address
- -Gateway <IPAddress>
- Gateway of the New Org Network as IP Address
- -IPRangeStart <IPAddress>
- IP Range Start of the New Org Network as IP Address
- -IPRangeEnd <IPAddress>
- IP Range End of the New Org Network as IP Address
- -Shared <Boolean>
Switch for Shared OrgVDC Network
Default: $True
- -Timeout <Int32>
Timeout for the Org Network to become Ready
Default: 120s
- <CommonParameters>
- This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, OutBuffer, PipelineVariable, and OutVariable. For more information, see about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
————————– EXAMPLE 1 ————————–
PS C:>New-MyOrgNetwork -Name Test -OrgVdcName “Test-OrgVDC” -OrgName “Test-Org” -EdgeName “Test-OrgEdge” -SubnetMask 255.255.255.0 -Gateway 192.168.66.1 -IPRangeStart 192.168.66.100 -IPRangeEnd 192.168.66.200
————————– EXAMPLE 2 ————————–
PS C:>New-MyOrgNetwork -Name Test -OrgVdcName “Test-OrgVDC” -OrgName “Test-Org” -EdgeName “Test-OrgEdge” -SubnetMask 255.255.255.0 -Gateway 192.168.66.1 -IPRangeStart 192.168.66.100 -IPRangeEnd 192.168.66.200 -Shared:$False
————————– EXAMPLE 3 ————————–
PS C:>$params = @{ ‘Name’ = ‘Test’;
- ‘OrgVdcName’= ‘Test-OrgVDC’;
- ‘OrgName’=’Test-Org’; ‘EdgeName’=’Test-OrgEdge’; ‘SubnetMask’ = ‘255.255.255.0’; ‘Gateway’ = ‘192.168.66.1’; ‘IPRangeStart’ = ‘192.168.66.100’; ‘IPRangeEnd’ = ‘192.168.66.200’ }
New-MyOrgNetwork @params -Verbose
- REMARKS
- To see the examples, type: “get-help New-MyOrgNetwork -examples”. For more information, type: “get-help New-MyOrgNetwork -detailed”. For technical information, type: “get-help New-MyOrgNetwork -full”. For online help, type: “get-help New-MyOrgNetwork -online”
New-MyOrgVdc¶
- NAME
- New-MyOrgVdc
- SYNOPSIS
- Creates a new vCD Org VDC with Default Parameters
- SYNTAX
- New-MyOrgVdc [-Name] <String> [-AllocationModel] <String> [[-CPULimit] <Int32>] [[-MEMLimit] <Int32>] [-StorageLimit] <Int32> [-StorageProfile] <String> [-NetworkPool] <String> [[-ExternalNetwork] <String>] [-Enabled] [-ProviderVDC] <String> [-Org] <String> [[-Timeout] <Int32>] [<CommonParameters>]
- DESCRIPTION
Creates a new vCD Org VDC with Default Parameters
Default Parameters are: * Network Quota * VM Quota * ‘vCpu In Mhz’ * Fast Provisioning * Thin Provisioning * private Catalog
- PARAMETERS
- -Name <String>
- Name of the New Org VDC as String
- -AllocationModel <String>
- Allocation Model of the New Org VDC as String
- -CPULimit <Int32>
CPU Limit (MHz) of the New Org VDC as String
Default: 0 (Unlimited)
Note: If AllocationModel is not AllocationVApp (Pay as you go), a limit needs to be set
- -MEMLimit <Int32>
Memory Limit (MB) of the New Org VDC as String
Default: 0 (Unlimited)
Note: If AllocationModel is not AllocationVApp (Pay as you go), a limit needs to be set
- -StorageLimit <Int32>
- Storage Limit (MB) of the New Org VDC as String
- -StorageProfile <String>
- Storage Profile of the New Org VDC as String
- -NetworkPool <String>
- Network Pool of the New Org VDC as String
- -ExternalNetwork <String>
- Optional External Network of the New Org VDC as String
- -Enabled [<SwitchParameter>]
Should the New Org VDC be enabled after creation
Default:$false
Note: If an External Network is requested the Org VDC will be enabled during External Network Configuration
- -ProviderVDC <String>
- ProviderVDC where the new Org VDC should be created as string
- -Org <String>
- Org where the new Org VDC should be created as string
- -Timeout <Int32>
Timeout for the Org VDC to get Ready
Default: 120s
- <CommonParameters>
- This cmdlet supports the common parameters: Verbose, Debug, ErrorAction, ErrorVariable, WarningAction, WarningVariable, OutBuffer, PipelineVariable, and OutVariable. For more information, see about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
————————– EXAMPLE 1 ————————–
PS C:>New-MyOrgVdc -Name “TestVdc” -AllocationModel AllocationPool -CPULimit 1000 -MEMLimit 1000 -StorageLimit 1000 -StorageProfile “Standard-DC01” -NetworkPool “NetworkPool-DC01” -ProviderVDC “Provider-VDC-DC01” -Org “TestOrg” -ExternalNetwork “External_OrgVdcNet”
————————– EXAMPLE 2 ————————–
PS C:>New-MyOrgVdc -Name “TestVdc” -AllocationModel AllocationVApp -StorageLimit 1000 -StorageProfile “Standard-DC01” -NetworkPool “NetworkPool-DC01” -ProviderVDC “Provider-VDC-DC01” -Org “TestOrg”
- REMARKS
- To see the examples, type: “get-help New-MyOrgVdc -examples”. For more information, type: “get-help New-MyOrgVdc -detailed”. For technical information, type: “get-help New-MyOrgVdc -full”. For online help, type: “get-help New-MyOrgVdc -online”